SINGER W1409 (New) Instruction Manual User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BUTTONHOLE SEWING
1 MARK WITH A PENCIL OR CHALK THE EXACT LENGTH OF THE BUTTONHOLE ON THE FABRIC.
2. REMOVE THE REGULAR PRESSER FOOT AND ATTACH THE BUTTONHOLE FOOT & PUT THE FABRIC
UNDER THE BUTTONHOLE FOOT.
3. SET THE STITCH LENGTH KNOB ON 'O'. 2GZAG WIDTH KNOB ON 'E AND NEEDLE POSITION KNOB ON
CENTER POSITION, THEN SEW 3-S STITCHES AS FIGURE (1).,
4. SET STITCH LENGTH ABOUT 0.5, 2GZAG WIDTH KNOB ABOUT T NEEDLE POSITION KNOB ON LEFT
POSITION, THEN SEW AS FIGURE (2) UNTILL YOU REACHES THE END OF THE MARKING.
5 SET ZIGZAG WIDTH KNOB ON 'E THEN SEW 3-8 STITCHES AS FIGURE (3).
5. SET THE STITCH LENGTH KNOB ABOUT 0.5, ZIGZAG WIDTH KNOB ON 2, NEEDLE POSITION KNOB ON
RIGHT POSITION, PUSH THE ’R* BUTTON SEW UNTILL YOU REACHES THE END OF THE MARKING AS
FIGURE (4).
„.............
7, REMOVE FABRIC FROM THE MACHINE AND OPEN THE BUTTONHOLE WITH A BL/TTONHOLE CUTTER
OR SEAM CUTTER.
■
( 1
)
ir
Before sewing fit buttonhole foot
as shown.
Cut buttonhole along centre with
cutler as shown.
. 24 ■