Regulating the presser foot pressure – SINGER W1409 (New) Instruction Manual User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REGULATING THE PRESSER FOOT PRESSURE
1. Push aown inner pm (A) to increase pressure.
(Light to medium fabrics!
2. Push down outer ring to release pressure. (Heavy
fabrics)
3. Insufficient pressure may cause poor feeding,
skipped stitches, or difficulty m guiding the faoric.
4. No pressure adjustment is required wnen darn
ing or sewing embroidery.
DROP FEED
Note; Darning plate can be purchased seoarateiy.
There are a few times when you want to control tne feeding of fabric by your
self.
Raise needle bar to its highest position and raise presser foot, place aarnmg plate
over needle plate aligning two pins of darning plate with holes of needle piate
You may then determine the movement of the fabric by yourself See page 19
for button sewing application - 13 —