Raising the bobbin thread, The bobbin thread – SINGER 1263 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Raising the Bobbin Thread

Hold needle thread lightly with left hand and turn hand

wheel slowly

toward you

until the needle enters plate.

Continue turning hand wheel and holding needle

thread until needle rises. Tighten your hold on the

needle thread and bring up bobbin thread in a loop.

Open the loop with your fingers. Draw approximately

10 cm (4 inches) of both threads under the presser foot
and place them diagonally to left. Close slide plate.