Attaching biindstitch hem guide – SINGER 1263 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Removing and Replacing the
Button Foot and Presser Foot Shank

• Raise needle to highest position by turning the hand

wheel toward you.

• Raise the presser foot.

• Loosen presser foot screw A and remove the shank

B, guiding it to the right.

• To replace the accessory, hook shank around the

presser bar and tighten the presser foot screw.

NOTE: Insert the edge of a coin in the seat of the

presser foot screw to loosen Hand tighten it securely.

Attaching Biindstitch Hem Guide

• Raise presser foot, loosen presser foot screw and

slip biindstitch hem guide between screw and shank

of the general purpose foot.

• Be sure underside of the guide clears the slide plate

and front of foot.

•

• Tighten screw with a coin.