Preparing to sew, Starting to sew – SINGER W815 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8. PREPARING TO SEW

1. Hold

the

end

of the upper-thread with the left hand, leaving

slack from the hand to the nee'dle.

2, Turn the balance wheel towards you to lef the needle bar to its

highest position.

3 Pull the thread you are holding, and the lower thread will be brought

up with it through the hole in the needle plate, as shown (Fig. 10).

4, Place both ends of the upper and lower thread under and to the back

of the

Dresser

foot fFig. 11).

9. STARTING TO SEW

Place the fabric to be sewn beneath the presser foot.

2. Lower the presser foot by lowering the presser bar lifter.

3. Start sewing by slowly turning the balance wheel towards you while

gradually working the foot control,

always

turn

balance

wheel

towards

YOU!