Accessible – SINGER W1317 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
3
3
3
?
3
»
»
>
V'
HOW TO CHANGE THE BELT
If It should ever become necessary to replace
the Kelt
.
must first be loosened and moved out.
machine, the hand wheel
To do this, follow these instructions:
1. Ke„ove dutch nut A iu center of wheel by taldno out th
2
. Bdo'"'
-- « -n Be Itfteror
the clutch nu! * n maTfdi oui ”T
.
1 hand wheel away from the machine carefully. Fig 26 Pull it ' K
.He grooyed aecbon which holds the belt
accessible
5 siidl °'''
°°
5. Slide new belt into grooved section and over motor pulley.
• ush hand wheel back against the machine.
7. If washer C has fallen off, replace so that the lips D arf^ ■ f
8. Replace nut and tighten screw securely.
After doing this, turn the clutch toward vnn
A -
,
needle still moves up and down as you turn the hanrwTeeT aglin
If the
Give the washer a half turn and replace the nut,
'
15