Preparing to sew, Removing the work – SINGER W1317 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

a°d Mendina In order to move the fabric freely in

any drreobon for darning and mending, release the pressure cap

B completely by pressing down on the snap look, A Fig 20

Turn the knob to -DN" position, which drops 'the feed well

to °HI" °

* '”'**'*

feed to normal, return knob

PREPARING TO SEW

Fig. 20

Do n“tT ‘f ‘r:

-w-

del:

« *

1>‘3

may

aeilect the needle and cause it to break.

never

run machine without material under the presser loot

Tult“

“ rd yrrtiiT'

ready to begin sewing. By haying the neel IL hl' f ““

““

the hand wheel to start the machine. Yon merely 1"

is regulated by increasing or decreasing the amounTrf °°°*”

g e amount of pressure exerted on the control.

REMOVING THE WORK

Be sure to stop the machine when the thread taVm . i

highest position. Now raise the nre

i + j j

needle bar are at the

NOW ra.se the presser foot and draw the fabric back and to the left.