Sewing on a button, L [xi jl, Buttons – SINGER 1288 User Manual

Page 75

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Buttons

Most flat buttons can be sewn quickly and easily using

the zig-zag stitch.

Pattern: Zig-Zag Disci

Needle Position:

L [XI JL

Stitch Width: j | i m

stitch Length: 0

General Purpose Needle Plate

Snap-in Feed Cover

Button Foot

Sewing on a Button

• Set your machine up according to the code above.

• Mark position of button on garment. Place garment

under foot. Align garment so that the button is

directly under the foot. Lower the presser foot to grip

button centrally.

t Turn hand wheel very slowly toward you until nee

dle point aligns with hole of the button. Adjust zig

zag stitch width, if necessary to permit clean entry

of the needle.

2. Continue turning hand wheel one complete

revolution and observe thatthe needle point is pro
perly positioned to enter the other hole.

• Take six to twelve stitches.

Remove garment from machine. Pull threads to un
derside of garment and trim.