Maytag MSA240HC - Manual (Page 13)

storage and Cleaning
When you nne finished u$irig your Maytag Handy Chiller bllow
Ihese step^
1. Remove arty beverage from the unit.
2- Remove all water and Ice from the Ice Water Bin. To
remove the ice and water for storage, select the CAN+ NO
SPIN setting, then place a cup under the Water Exit Jet and
press the START/STOP button. When the oup i$ full, press
the START/STOP button again and discard the water.
Continue this process until no more water is flowing from the
Water Exit Jet. There will still be a small amount of water in
the Ice Water Bin. To remove this water, first unplug the uriit,
then rock the unit front to back to remove any water caught
in the pump system. Carefully pour the water into your sink
over the side of the unit and not over the Touch-Pad Timer.
Avoid getting the Touch Pad-Timer wet. Always remember
to remove the water when you are finished with the unit, Co
r^ot allow water to sit in the Maytag Handy Chiller for extend­
ed periods of time.
3. Allow the unit to air dry with the lid up.
A. Store the unit in a safe place out of the reach of children.
1. Plug in the unit and lift up the lid. Choose the CAN + NO
SPIN setting and let the soapy water circulate in the
machine. Follow the water removal instructions on the left to
remove the soapy water
2. Rince the unit with regular tap water. Circulate the rinse
water through the unit. Follow the water removal instructions
on the fefl to_remove the soapy water.
3. Unplug the tan it and allow to air dry.
If the unit is dirty, clean with mild lukewarm soapy water and
follow these cleaning steps.
DO N O T USE ABRASIVE POWDERS OR SCOURING
PADS SINCE THEY MAY SCRATCH THE SURFACE OF
YOUR Maytag Handy Chiller.
13