Baby bottle warming temperature guideline chart – Maytag MSA240HC User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Maytag^ Handy Chiller™-

Model

msa

240HC

How to operate your IVlaytag Hand^

Chiller as a baby bottle warmer

"l. Turn on your hoi tap water and let it run until the hottest

temperature is obtained (approximately 45^C/113°F to

55°Cil3lOF),

BE CAREFUL WHEN FILLING AND DISPENSING

OF THE HOT WATER BATH.

2. Lift Ihe lid and add hot tap water to the maximum fili line.

3. Place your baby bottle onto the roller with the nipple or
cap side facing out arid close the lid. Make sure the nipple or
cap is sealed tight to prevent any liquid from leaking.

4. If your baby bottle is cylindrical and able to be rotated or
the roller, select the CAN/BABY BOTTLE button and press
the START^STOP button. Your baby bottle will complete a
cycle of 1 minute. If your baby bottle is not cylindrical or not
able to be rotated on the roller, select the NO SPIN button
and Ihe CAN/BABY BOTTLE button. Next, press the
START/STOP button and your baby bottle will complete a
cycle of 2 minutes. Please refer to the baby bottle warming
chart guidelines on the right for cycle times and approximate
temperatures.

ALWAYS TEST "mE TEMPERATURE OF THE BABY FOR-

MULABREAST MILK BEFORE GMNG TO YOUR CHILD.

5. When the warming cycle has finfehed, lake your baby bot

tle out and test the temperature before giving to your child,

6. If it is still not warm enough, repeat steps 4 and 5,

Baby Bottle Warming

Temperature Guideline Chart

When using the Maytag Handy Chiller to heal baby formula, the
final temperature will vary based on the following; the starting tem

perature of the baby formula, the temperature of the hot water, the

volume of formula being heated, and the container being used.
The following chart should be used as a guideline.

ALWAYS TEST THE TEMPERATURE OF THE BABY

FORMULA/BREAST MILK BEFORE GtVING TO YOUR

CHILD.

PLEASE NOTE; Household hot water temperature wilt vary, but is

normally between 45^C/m<>F and

Method
Bottle Volume

Temperature of Hot Tap Water

45°C/113PF

50^0/122°F

55°C/131°F

Ending Temperature of Baby Bottle

ROTATING

1-40Z

Minute - BABY BOTTLE

25®C/77®F 1 27°C/S1<^F | 29°C/S4^F

ROTATING

5-6oz

2 Minutes - BABY BOTTLE / EXTRA

27®C/&1^F I 29°C/S4iJF | il^C/SS^^F

NON-ROTATING

1-4oz

2 Minutes - BABY BOTTLE ! NO SPIN

23®C/73'='F 1 25°C/77^F | 27®C/Bl'=*F

NON-ROTATING

5-6oZ

4 Minutes - BABY BOTTLE / NO SPIN / EXTRA

25^C/77<^F 1 2B°C/B2^P 1 3l^C/BB'^F