Psw option 1.1, Ir—lyg, Outline generation - converting stitches to block – SINGER S10 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PSW Option 1.1
Outline Generation - Converting Stitches to Block
When a design is loaded that does not include blocks of stitches, such as a
.dst or.exp, the program will automatically shows a dialog box asking if
you would like to convert stitches to blocks.
If you say yes, the stitches will be converted to blocks. This will enable you
to edit the design.
1. To change a design, choose FilesiLoad.
2. Choose the Drive: where
the design is located.
3. Choose the File Type:
4. Choose the design and
click OK.
Loid deiign
BQ
dPt« ijii »Ip
n«
neyw purvr:
I
Carni
5.
A dialog box will now appear and ask Convert stitches to block? Click
Yes if the design will lx? edited. If no editing is to be done, choose No.
The design can then be loaded and sewn.
O
Convert rttchcj to Uod(3 ?
ir—lYg~".
'i
No
\
Cwd
\
Note:
The stitch count will increase when you convert stitches to blocks.