SINGER 119-2 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the PART number
in the I'TRiST column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
Hardened, Polished and Plated.
Polished and Plated.
Hardened only.
Polished only.
Soft, not Polished.
Hardened and Polished. A.
B.
C.
I).
E.
F.
G.
H.
J.
K.
L.
M.
P.
R.
T.
Blued.
Plated only.
Hardened and Plated.
Brass or Gilt.
Oxidized.
Japanned.
Parkerized.
Copper-plated.
These letters MUST BE USED when they appear in the list,
and AFTER the number as in the list.
In this series:
l.to 1500 and 50001 to 51.500 are Screw Numbers.
1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.
2001 to 50000 and 52(X)1 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE U.SED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 119-2
FOR GFNERAL WORK ON BRIEF CASES AND OTHER LIGHT
AND MEDIUM WEIGHT LEATHER AND FABRIC. COM­
BINED UPPER AND NEEDLE FEED, N0 UNDER FEED.
NO. PLATK NAME
:i7:iti:i - — Ann
8582 ()114 Dowel Pin.................................
nut) 0114 Oil T'ube with 29599, for oiling 37343
1215-1 0114 • “ “ “ “ “ “ 37344
29.5tl9 til 14 “ “ Packing (felt).....................................
lltiK 8851 Screw (back)..............................
SI)8 e 8851 “ (front).............................
37:177 88.52 Shaft.......................................
12357 8853 “ Flanged Bushing (back)....................
■U8c 8851 “ “ “ “ Set
•Screw.