Blind hem stitching – SINGER W1750C User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BLIND HEM STITCHING

This stitch will sew without stitches showing on right side of fabric.

1. Fold the fabric as shown

on drawing.

2. The guide (A) on the

blind foot ensures even
feeding of the fabric
when blind hem stitch
ing. The guide (A) is
adjusted by turning the
adjusting screw (B).

3. Place fabric so that the

straight stitches are on
the protruding hem edge
and the zigzag stitches

just catch one thread of

the folded edge.Turn
the screw so that the
guide barely touches the
folded edge of fabric. .

4. Lower the presserfoot

and sew hem,guiding
fabric evenly along the
guide.

5. Turn the fabric over

when you have completed
sewing.

Overcasting

1 —

1cm

Wrong Side

5mm

This manual is related to the following products: