Control buttons & drop feed lever, Control buttons &drop feed lever – SINGER W1750C User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROL BUTTONS & DROP FEED LEVER
, stop when
A.START/STOP BUTTON
.
^
^
,
The machine will start running when start/stop button is pressed and wil
pressed the second time.
The machine will rotate slowly at start sewing.
B SPEED CONTROL BUTTON
,
,
,
'The machine will sew faster when the lever is moved to the right, and sew slower when
the lever is moved to the left.
C.SLOW BUTTON
While sewing, by pressing this button,
machine will sew in slow speed. Pressing
this button again, the speed will return.
□ .REVERSE STITCH BUTTON
The machine will continue to sew in reverse at low speed while the button is pressed and
Stop when the button is released.
E. NEEDLE UP/DOWN BUTTON
„ .n
The needle can be raised or lowered by pressing this button. Pressing this button will pern
one stitch sewing.
F DROP FEED LEVER
The fabric feed dogs project up through the needle plate, directly below the presser foot
The function is to move the fabric being sewn. The drop feed lever controls the fabric
Rx*ordinary sewing, move the lever to the right. This rases feed dogs to their highest
Dosition For most sewing, the lever should be in this position.
,
.
For Lrning or free motion embroidery or whenever fabric is to be moved by hand, move
the lever to the left to lower the fabric feed dogs.