SINGER 216G User Manual
SINGER Sewing machines
Table of contents
Document Outline
- INSTRUCTIO
- SEWING MACHINE
- SINGER Sewing Machine
- Class 216
- I. GENERAL INSTRUCTIONS FOR USING THE MACHINE
- Releasing the Balance Wheel
- The Treadle of the Machine
- General Instructions
- Kinds of Needles
- The Removal of the Bobbin (Fig. 12)
- To Wind the Bobbin
- To Prepare for Sewing (Fig. 18)
- To Commence Sewing
- To Remove the Work
- Thread Tensions
- To Regulate Thread Tensions (Fig. 22)
- To alter the Length of Stitch
- Reverse Feed
- Regulating the Presser Foot Pressure on the Material
- To Turn a Corner
- To Sew Tricot or Bias Cut Material
- A Stitch that is easily Raveled
- Left Needle Position
- Right Needle Position
- Bight Limitations
- SINGER-MOTOR
- SINGERLIGHT
- II. CARE OF THE MACHINE
- IV. HEMMING AND SEAMING WITH STRAIGHT STITCHES
- V. GENERAL ZIG ZAG WORK
- VI. SPECIAL WORK WITH THE ZIG ZAG STITCH
- VII. EMBROIDERING AND
- DARNING
- VIII. USE OF THE EMBROIDERY
- SET
- IX. WORK WITH AIR TUCKING
- I. GENERAL INSTRUCTIONS FOR USING THE MACHINE
- SINGER