SINGER 216G User Manual
SINGER Sewing machines
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- INSTRUCTIO
- SEWING MACHINE
- SINGER Sewing Machine
- Class 216
- I. GENERAL INSTRUCTIONS FOR USING THE MACHINE
- Releasing the Balance Wheel
- The Treadle of the Machine
- General Instructions
- Kinds of Needles
- The Removal of the Bobbin (Fig. 12)
- To Wind the Bobbin
- To Prepare for Sewing (Fig. 18)
- To Commence Sewing
- To Remove the Work
- Thread Tensions
- To Regulate Thread Tensions (Fig. 22)
- To alter the Length of Stitch
- Reverse Feed
- Regulating the Presser Foot Pressure on the Material
- To Turn a Corner
- To Sew Tricot or Bias Cut Material
- A Stitch that is easily Raveled
- Left Needle Position
- Right Needle Position
- Bight Limitations
- SINGER-MOTOR
- SINGERLIGHT
- II. CARE OF THE MACHINE
- IV. HEMMING AND SEAMING WITH STRAIGHT STITCHES
- V. GENERAL ZIG ZAG WORK
- VI. SPECIAL WORK WITH THE ZIG ZAG STITCH
- VII. EMBROIDERING AND
- DARNING
- VIII. USE OF THE EMBROIDERY
- SET
- IX. WORK WITH AIR TUCKING
- I. GENERAL INSTRUCTIONS FOR USING THE MACHINE
- SINGER