Straight stitching – SINGER W714 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STRAIGHT STITCHING

For straight sewing on fine fabric or very soft ma

terial, you may want to use the straight stitch presser
foot and the straight stitch needle plate which are in

cluded in your accessory box. Both have narrow needle
slots.

Changing the Presser Foot and Needle Plate :
(1) Presser Foot

(A)

Loosen thumb screw (19, Fig. 1) and

remove zigzag presser foot.

(B)

Replace with straight stitch presser foot

(Fig. 22A).

(2) Needle Plate

(A) Slide cover plate (17, Fig. 1) to the left as

far as possible.

Remove screws holding needle plate (16,

Fig. 1) to bed plate.
Remove zigzag needle plate.
Replace with straight stitch needle, plate

(Fig. 22B).

sure

set

the

stitch

width

and

buttonhole

control knob at

or the needle will break in striking

the foot or plate.

Grasp outer rim of zigzag dial (A, Fig. 23) and press

down on lock B. Turn dial as far to the left as possible.
Pointer will then be on the zero mark.

(B)

cc)

CD)

Fig. 22-A

Fig. 22-B

Fig. 23