SINGER 147-106 - Manual (Page 9)

16
MACHINE No. 147-106
For Seat Searr'ng Light and Medium Trousers. Two needles,
two loopers. Gauge 1/32 inch. Ball bearing. Needle bar stroke
I 7/32 inches. The loopers are arranged so that they may be
thrown out of position for convenience in threading. An improved
oiling system automatically oils all of the principal bearings of
the machine. Speed 4000 R. P. M.
NOTE: THIS MACHINE IS THE SAME AS THE 147-104 MACHINE
WITH THE FOLLOWING EXCEPTIONS:
No. Plate
131563 2059,5
131564 20595
131063 ..........
131064 20594
68140 20600
665J 20600
131349 ..........
239J 20600
131568 ..........
131569 ..........
131570 20597
Note: No
26276 20565
131565 ..........
46099 --------
131566 20597
131567 20597
Name
Looper (back) closed eye. In place of
131552 ...............................................................
Looper (front) closed eye. In place of
131553 ...............................................................
Needle Bar complete, for 1/32 in. gauge.
Nos. 64319 and 131064, in place of
131554 ..............................................................
Needle Clamp with two 50014P, for 1/32
in. gauge. In place of 131555...........................
Presser Foot Hinge J’ln...........................................
" " " " Set Screw......................
" " Knife................................................
Presser Foot Knife Screw........................................
" " Plate.................................................
" “ Shank with 665J........................... .. ..
Presser Foot (hinged) with Knife complete
for 1/32 In. gauge. Nos. 239J, 68140,
131349, 131568 and 131569.............................
131570 Is regularly furnished on machine.
Presser Foot Hinge Pin............................................
" " Plate.................................................
" " Shank...............................................
Presser Foot (hinged) complete, for 1/32
In. gauge. Nos. 26276, 46099 and
131565................................................................
Throat Plate, for 131551..........................................
17
MACHINE No. 147-107
For Seat Seaming Medium and Medium-Heavy Trousers. Two
needles, two loopers. Gauge 1/32 inch. Ball bearing. Needle bar
stroke I 5/16 inches. The loopers are arranged so that they may
be thrown out of position for convenience in threading. An im­
proved oiling system automatically oils all of the principal bearings
of the machine. Speed 4000 R. P. M.
NOTE: THIS MACHINE IS THE SAME AS THE 147-104 MACHINE
WITH THE FOLLOWING EXCEPTIONS:
No. Plate Name
131486 20594 Arm Rock Shaft Crank, back (ball bearing,
solid) with two 50083C, In place of
131072.........................................................................
131487 20561 Arm Rotary Shaft In place of 131476.............................................
131488 -------- " " " 131487 with 640E, 131111
131489 and 131502, In place of 131479
131379 20599 Cloth Plate Slide (right) 9/64 In. Throat
Plate Clearance cut, for 131386..................................
131386 ........... Cloth Plate Slide (right) complete (9/64
In. Throat Plate clearance cut, for
131392, Nos. 131379, 131381 and two
725C, In place of 131383............................................
131392 -------- Cloth Plate complete, for Throat Plates
with 9/64 in. offset, Mos. 131051,
131374 and 131386, In place of 131389
131409 ........... Crank Connecting Rod 131471 with 131486,
In place of 68459........................................................
131060 20598 Feed Dog, 16 teeth (10 teeth to the Inch)
for 1/32 In. gauge, for 131071, In
place of 131551...........................................................
131563 20595 Looper (back) closed eye. In place of
131552 ..................................................................
131564 20595 Looper (front) closed eye. In place of
131553 ..................................................................
131063 -------- Needle Bar complete, for 1/32 In. gauge.
Nos. 64319 and 131064, In place of
131554 ..................................................................
131064 20594 Needle Clamp with two 50014F, for 1/32
In. gauge. In place of 131555.....................................
131356 -------- Presser Foot Chalnlng-off Plate....................................
20178 -------- r n n „ Spring...