Lace trimmed нем, French seam, Lace trimmed hems – SINGER W106 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

02/14/2008
LACE TRIMMED НЕМ
То sew а narrow hem and attach
lace in one stitching, insert lace in
the slot next to needle.Sew hem as
shown, guiding lace under needle
and hem into scroll.
lace
edge
with
invisi
ble
STITCHING
Hold lace 1/8 inch from raw edge
on right hand side of fabric. Insert
both in scroll, as for plain narrow
hem, let hem roll over and sew m
lace. When the stitching is complet
ed the hem is pressed on the wrong
side.
FRENCH SEAM
Place material with right sides
facing each other and the top piece
of material extending 1/8 inch to
right hand edge of lower piece,
insert in hemmer scroll allowing
hem to roll over and sew in top
fabric making French seam
For cording effect, use zigzag stitch
wide enough to catch both edges
of the narrow rolled hem and sew
with satin stitch. This can be used
for covering chairs and so forth.