SINGER W106 - Manual (Page 18)

02/14/2008
ADJUSTING PRESSURE ON FABRIC AND FEED DOG HEIGHT
• GENERAL SEWING
Usually for normal sewing, except for sewing on
very heavy and bulky fabrics and very stretchy
knit fabrics of medium and very light weight,
the center pin (B) of the pressure control should
be at its lowest position also, the right button
of feed dog height control be pushed full down,
except for sewing on very sheer fabrics. For
above exceptional fabrics, refer to below table.
To reduce half the pressure, press the outer
ring (A) of the pressure control, then press the
center pin (B) down again to halfway down.
To reduce half the feed dog height, push the
left button of feed dog height control slightly
down to raise right button up at a halfway
position.
-s o
Ordinary fabric of less elasticitv;
Heavy and bulky fabrics
Medium weight fabrics
Light wei^t soft fabrics
Very stretdiy fabrics and knits;
Heavy and bulky ones
Medium wei^t ones
Light weight and sheer ones
Half
Full
Full
Half
Half
Full
'AAf button:
F ull down
Full down
Half way down
AAf button:
Full down
Full down
Half way down
• MENDING AND DARNING:
In order to move the fabric freely in any direction for darning and mending, release
the center pin (B| completely by pressing down on the outer ring (A). Press down
the left button of feed dog height control all the way down, which drops the
feed dog well below the needle plate. To return the feed dog height to normal, push
the right button down in full position.