Changing needle – SINGER W1523 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing Needle

Set needle in the highest position
by turning handwheel towards you.

Loosen needle clamp screw and

take out needle.

With flat face away from you, insert
a new needle into groove of needle

bar.

® and tighten needle clamp screw

firmly.

Always use a straight needle with a

sharp point.

Using defective or worn needles not
only causes stitch skipping, break
age of needles or snapping of
thread: it also can damage hook

and needle plate.