SINGER W1523 - Manual (Page 23)

Set machine as shown.
7. SEWING ON BUTTONS
Position a button and material un­
der foot. When needle comes to left
side of stitch, lower foot. Raise
needle and adjust zigzag width so
that needle comes to right hole of
button.
Make one stitch be certain that nee­
dle is aligned with botton’s holes.
Run machine at medium speed and
sew 5-6 z'gzag stitches.
Stop machine when needle is in
upper position.
@ Set zigzag width control to 0,
align needle with button’s hole and
sew 3-4 stitches to prevent stitches
from unlocking.
OR
(5) Remove work and cut off
threads.
Draw thread ends through to wrong
side and tie a knot.