Using the flash, Taking pictures and videos – Kodak EASYSHARE C 503 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Taking pictures and videos
2 If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button, recompose the scene, and repeat step 1.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus
Zone (see page 22) and set Center Zone, the framing marks are fixed at Center Wide.
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Press the ^ button repeatedly to scroll
through flash modes (see Flash modes below).
The current flash mode Is shown In the LCD
status area.
FUish-to-subject distance
Zoom position
Flash distance
Wide angle
2-11.5ft(0.6-3.5m)@ISO 140
Telephoto
2-6.6ft(0.6-2.0m)@ISO 140
Flash modes Flash fires
m m Auto
Flash
When the lighting conditions reguire it.
m Fill
7
Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is "backlit" (when the light is behind the
subject).
"yt
Once, so the subject's eyes become accustomed to the flash, then fires
again when the picture is taken. (If the lighting conditions reguire flash but
do not reguire Red-eye reduction, the flash may fire only once.)
Never
WWW. kodak, com/go/support