Sears 308.70109 - Manual (Page 5)

ASSEMBLY INSTRUCTIONS
STEP 10: Stake down tent by inserting a stake through the
webbing loop at each fly comer and each inleimediate
stake loop on the tent Hammer stakes Into the ground
at a 45’ angle, by using a hammer or mallet. Make
sure to pull tent out even and tight
Tent should appear as shown.
STEP 11: Guy ropes are provided for windy conditions.Tie guy
rope to the loop located at each upper comer of the
fly and stake down with a loop made with the slider.
Adjust sliders as necessary.
NOTE: If you choose to use your tent fly as a canopy only,
you may do so by omitting Steps 8 and 9. Stake
down fly corners and guy out the fly for extra stability.
Your tent includes a divider curtain that can be
hooked into the center of your tent to divide the tent
into two rooms.
Convenience pockets are provided for storing
small camping gear.
NOTE: To take down tent, follow above steps in the reverse
order. Be sure to leave tent unzipped. Place stakes
into stake bag, which is provided.
Fold fly and place on top of tent. Fold tent into thirds
lengthwise toward the door. At opposite end of the
doors, start a small, tight roll and roll toward the doors.
Once rolled, tie a string or rope around tent to hold
into place. Slide the tent, frame and stakes Into carry
bag. Make sure tent is dean and dry before storing.