How to fold and move the treadmill – Sears PRO FORM 585 831.297662 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Change the incline of the treadmill, if desired.
To increase or decrease
the incline, hold down the
top or bottom of the incline
button.
Important: Do not
change the Incline of the
treadmill by placing ob
jects under the treadmill.
Change the incline only
as described above.
important: Before folding the treadmill, adjust
the Incline to the lowest position.
Q
When you are finished exercising, stop the
walking belt and remove the key.
Step onto the foot rails,
stop the walking belt,
and remove the key
from the console. Store
the key in a secure
place.
Note: Any time that the walking belt is stopped
and no console buttons are pressed for five min
utes, the displays will automatically turn off.
HOW TO FOLD AND MOVE THE TREADMILL
10
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the lowest
position.
If the Incline is not at the lowest position, the
treadmill will be permanently damaged. Next, unplug the
power cord. Caution: You must be able to safely lift 45
pounds (20 kg) In order to raise, lower, or move the
treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right.
Caution: To avoid pinching your hands, do
not hold the treadmill In the locations indicated by the
arrows. To decrease the possibliity of injury, bend
your legs and keep your back straight. As you raise
the treadmili, make sure to iift with your legs rather
than your back.
Raise the treadmill about halfway to the
vertical position.