beautypg.com

Customer responsibilities, General recommendations, Lubrication chart – Sears 917.25051 User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

CUSTOMER RESPONSIBILITIES

MAINTENANCE SCHEDULE

FILL IN DATES

AS YOU COMPLETE

REGULAR SERVICE

V^SERVICE DA'

FES

T

R

A
C

T

0

R

Check Brake Operation

Check Tire Pressure

1/

Check for Loose Fasteners

Sharpen/Replace Mower Btades

✓ 4

Lubrication Chart

Check Battery Level/Recharge

✓ s

Clean Battery and Terminals

t/

Check Transaxle Cooling

1/

Adjust Blade Belt(s) Tension

✓ 5

Adjust Motion Drive Belt(s) Tension

E

N

G

I

N

E

Check Engine Oil Level

Change Engine Oil

•^2,3

Clean Air Filter

✓ a

Clean Air Screen

✓ a

Inspect Muffler/Spark Arrester

Replace Oil Filter (If equipped)

|/,2

Clean Engine Cooling Fins

✓ a

Replace Spark Plug

Replace Air Filter Paper Cartridge

✓ a

Replace Fuel Filter

1 - Chafigs more often when operating under a heavy load or in high ambient temperatures.

2 - Service more often when operating in dirty or dusty conditions.

3 - if equipped with oii filter, change oil every 50 hours.
4 - Replace btades more often when mowing in sandy soil.

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have

beeh subjected to operator abuse or negligence. To

receivefullvaluefrom the warranty, operatormust maintain

tractor as instructed in this manual.

Some adjustments wiil need to be made periodically to
properly maintain your tractor.

All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.

Once a year you should replace the spark plug, clean

or replace air filter, and check blades and belts for

wear. A new spark plug and clean air filter assure

proper air-fuel mixture and help your engine run better

and last longer.

BEFORE EACH USE

Check engine oil level.

Check brake operation.

Check tire pressure.

Check for loose fasteners.

IMPORTANT: DO NOT OIL OR GREASE THE PIVOT

POINTS WHICH HAVE SPECIAL NYLON BEARINGS.

VISCOUS LUBRICANTS WILL ATTRACT DUST AND DIRT

THAT

WILL

SHORTEN

THE

LIFE

OF

THE

SELF-

LUBRiCATlNG BEARINGS. IF YOU FEEL THEY MUST
BE

LUBRICATED,

USE

ONLY

A

DRY,

POWDERED

GRAPHITE TYPE LUBRICANT SPARINGLY.

16

6 - if equipped with adjusiabte system.
6 ■ Not required if equipped vwth maintenance-free battery.

7 - Tighten front axle pivot bolt to 35 tt.-lbs. maximum.

Do not overtighten.

LUBRICATION CHART

@TIE ROD BALL JOINTS

(J)SAE

30

MOTOR OIL

AP!

- SF/SG

(D

g

ENERAL PURPOSE GREASE

(DREFER TO CUSTOMER RESPONSIBILITIES “ENGINE” SECTION

0SPRAY SILICONE LUBRICANT (MOVE BOOTS TO LUBRICATE)