Install chute deflector remote control, Check tire pressure, Assembly / pre-operation – Sears 944.528117 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY / PRE-OPERATION
INSTALL CHUTE DEFLECTOR REMOTE CONTROL
(See
Figs. 8 and 9)
1,
Install remote cable bracket to discharge chute with
5/16-18 carriage boit and 5/16-18 iocknut as shown.
Tighten secureiy,
2,
Instaii remote cabie eyeiet to chute deflector with
1/4-20 shouider boit and 1/4-20 iocknut as shown.
Tighten nut secureiy, Cabie eyeiet wiii be ioose on
shouider boit,
3, Instaii spring hooks between hex nuts on chute rotater
head and into hoie in chute deflector as shown.
CHECK TIRE PRESSURE
The tires on your snow thrower were overinfiated at thefac
tory forshipping purposes, Correct and equai tire pressure
is important for best snow throwing performance,
• Reduce tire pressure to 14-17 PSI,