To replace headlight bulb, Interlocks and relays, To replace fuse – Sears EZ3 917.256543 User Manual
Page 24: To remove hood and grill assembly (see fig. 31), Ser¥ice änd adjustments
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SER¥iCE ÄND ADJUSTMENTS
FIG. 30
TO REPLACE HEADLIGHT BULB
« Raise hood.
* Pull bulb holder out of the hole In the backside of the
grill.
0
Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the griil.
“ Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run
poorly, stop running, or prevent it from starting.
“ Check wiring. See electrical wiring diagram in the
Repair Parts section of this manual.
TO REPLACE FUSE
Replace with 30 amp automotive-type plug-in fuse. The
fuse holder is located behind the dash.
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 31)
“ Raise hood.
® Unsnap headlight wire connector.
Stand in front of tractor. Qrasphoodatsides.tilttoward
engine and lift off of tractor.
« To replace, reverse above procedures.
24