Sears EZ3 917.256543 User Manual
Assembly flhrflup, Owner, Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
smm
U 2 -
f'O
/----------
n
D
■ ■ ■ ■ --i
”v;t
. •.. •; • / ....
Q
V
1
M
____________
i
.;......
\
;
y.
n
......
ODEL NUMBER 917.256543
owner
’
s
manual
® Assembly
flHrflUP?
© f^ruarsifinn
^
ibf
C3H
i
I%
i
^I *
»Customer Responsibilities
® Service and Adjustments
® Repair Parts
m
This product has a lowemission engine which operates differently
! from previously built engines. Before you start the engine, read
--------’ and understand this Otvnor’s Manual.
CAUTION: Read and follow all safety rules and instructions before operating this equipment.
FOR CONSUMER ASSISTANCE HOT LINE. CALL THIS TOLL FREE NUMBER: 1-800-659-5917
z:z:3
-LO.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Document Outline
- smm
- ® Assembly flHrflUP?
- »Customer Responsibilities ® Service and Adjustments ® Repair Parts
- Safe Operation Practices for Ride-On Mowers
- ENGINE
- MAINTENANCE
- PERFORMANCE
- Parts Bag contents shown futi size
- Parts packed separately in carton
- Parts bag contents not shown fyll size
- UNPACK CARTON
- ATTACH STEERING WHEEL (See Fig. 1)
- TO ROLL TRACTOR OFF SKID (See Operation section for location and function of controls)
- CONNECT BATTERY (See Figs. 2 and 3)
- INSTALL SEAT (See Fig. 4)
- CHECK TIRE PRESSURE
- CHECK DECK LEVELNESS
- CHECK FOR PROPER POSITION OF ALL BELTS
- CHECK BRAKE SYSTEM
- ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 5)
- INSTALL MULCHER PLATE (See Figs. 6 St 7)
- TO CONVERT TO BAGGING OR DISCHARGING
- P! i (®)|I
- READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
- TO SET PARKING BRAKE (See Fig. 9)
- STOPPING (See Fig. 9)
- TO USE THROTTLE CONTROL (See Fig. 9)
- TO MOVE FORWARD AND BACKWARD (See Fig. 9)
- TO ADJUST MOWER CUTTING HEIGHT (Se© Fig. 9)
- TO OPERATE MOWER {See Fig. 10)
- TO OPERATE ON HILLS
- TO TRANSPORT
- CHECK ENGINE OIL LEVEL (See Fig. 17)
- ADD GASOLINE
- TO START ENGINE (See Fig. 9)
- MULCHING MOWING TIPS
- BEFORE EACH USE
- LUBRICATION CHART
- BRAKE OPERATION
- TIRES
- BLADE CARE
- BLADE REMOVAL (See Fig. 13)
- TO SHARPEN BLADE (See Fig. 14)
- BATTERY
- V-BELTS
- TRANSAXLE COOLING
- LUBRICATION
- CLEAN AIR SCREEN (See Fig. 16)
- AIR FILTER (See Fig. 16)
- CLEAN AIR INTAKE/COOLING AREAS
- MUFFLER
- SPARK PLUGS
- ENGINE OIL FILTER (See Fig. 17}
- IN-LINE FUEL FILTER (See Fig. 18)
- TO REMOVE MOWER (See Fig. 19)
- TO INSTALL MOWER (See Fig. 19)
- TO LEVEL MOWER HOUSING
- TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 24)
- TO ADJUST BRAKE (See Fig. 25)
- TO REPLACE MOTION DRIVE BELT
- TRANSAXLE SHIFTER LINKAGE AND ADJUSTMENT {See Figs. 27 and 28)
- TO ADJUST STEERING WHEEL ALIGNMENT
- FRONT WHEEL TOE-1N/CAP8ER
- TO REMOVE WHEEL FOR REPAIRS
- {See Fig. 29)
- TO START ENGINE WITH A WEAK BATTERY {See Fig. 30)
- TO REPLACE HEADLIGHT BULB
- INTERLOCKS AND RELAYS
- TO REPLACE FUSE
- TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 31)
- TO ADJUST THROTTLE CONTROL CABLE (See Fig. 32)
- TO ADJUST CARBURETOR (See Fig, 33)
- BATTERY
- FUEL SYSTEM
- ENGINE OIL
- CYLINDERS