Service and adjustments – Sears 917.257632 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SERVICE AND ADJUSTMENTS

TO REPLACE HEADLIGHT BULB

•

Raise hood.

•

Pull bulb holder out of the hole in the backside of the
grill.

•

Replace bulb in holder and push bulb holder securely
back into the hole in the backside of the grill.

•

Close hood.

interlocks

and

relays

Loose or damaged wiring may cause your tractor to run

poorly, stop running, or prevent it from starting.

•

Check wiring. See electrical wiring diagram in the

Repair Parts section of this manual.

TO REPLACE FUSE

Replace with 30 amp automotive-type plug-in fuse. The

fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY

(See Fig. 28)

•

Raise hood.

•

Unsnap headlight wire connector.

•

Stand in front of tractor. G rasp hood at sides, tilt toward
engine and lift off of tractor.

•

To replace, reverse above procedures.