Sears 934.4482639 - Manual (Page 25)

QUICK SET PROGRAM
You may set the TV/VCR to start and end recording
one program within 24 hours by simply pressing
QUICK SET PROGRAM button on the TV/VCR
It is easy for you to record today's TV program.
♦ Power must be on to set Quick Set Program.
♦ Clock must be set to the correct time before
setting the timer.
♦ Quick Set Program is memorized to program
number 8.
In the example below, the Quick Set Program is
being set to record:
SETTING TIME from 10:00PM to 11:00PM
CHANNEL CHIO
TAPE SPEED SP
Current time is 8:00PM.
Note: This function is not operative with the
remote control.
Insert a cassette tape with its erasure prevention
tab in place, if necessary, rewind or fast forward
the tape to the point at which you want to begin
recording. Timer display will be changed to the
Counter mode.
Press QUICK SET PROGRAM button on the
TV/VCR.
MONITOR
C D
QUICKSET
PROGRAM
■OUCK S£T PnOQAAM-
OATE ^ Oa'26 THU
■•START«ME PM -*■ r
END TIME -•
CHANNEL 06
TAPE SPEED SLP
NOTE:
1) Key inputs for steps r2]~[10] should be
done within 2 seconds, otherwise input
mode will forward to next mode.
2) You may forward to next step when you
press SELECT button on the TV/VCR.
3) When you press CLEAR button on the
TV/VCR, all input data will be erased
and return to initial display (step [2]).
Press SET "+" o r b u t t o n until your desired start
time hour is displayed. (Example: 10)
'CHANNEL
------- 1 I
SET +
-QUICK SET PROGRAM­
DATE (^25 THU
•* START TIM^ 10!&.. PM
I»' I s
END TIME -­
CHANNEL 06
TAPE SPEED SLP
Press SET "4-" o r b u t t o n until your desired start
time minute is displayed.
(Example: 00)
TCHANNEL
CZZD <---------
SET
•QUICK SET PROGRAM­
DATE 03/2S THU
•• START TIME Jtiyi 1! r M y i s
END TIME ••
CHANNEL 06
TAPE SPEED SLP
Press SET or button until AM or PM is
displayed. (Example: PM)
▼CHANNEL A
(----- 71 C71D
- SET -t-
•QUICK SET PROGRAM­
DATE 03/26 THU
■V if
-•START TIME 10A6-PM-I"'«
END TIME
CHANNEL 06
TAPE SPEED SLP
Press SET "-h" o r b u t t o n until your desired end
time hour is displayed. (Example: 11)
•QUICKSET PROGRAM­
DATE 03/25 THU
STARTTIME 10:00 PM
-END TIME? ItlOft PM
*»' i Nu
CHANNEL 06
TAPE SPEED SLP
Press SET o r b u t t o n until your desired end
time minute is displayed. (Example: (X))
•QUICK SET PROGRAM­
DATE 03/25 THU
START TIME 10O0 PM
-END TIME - h ^OO n PM
CHANNEL 06® **
TAPE SPEED SLP
25-