Sears 831.287602 - Manual (Page 10)

EXERCISE MONITOR MODES
-The exercise monitor features five different modes: i . _
" i ■ , ■ ■ ■ ■ J ■ ' ■ ' M - , ' ■
SPEED—Displays your pedalirig speed, in miles per
' hour.-;■ :\c ' ' ■ ■
—Displays the elapsed time. Note: Time will be
counted only while you are pedaling. If you stop for ten
seconds or longer, the TIME mode will hold until you
resume pedaling.
DISTANCE—Displays the total distance you have
pedaled, in miles.
CALORIE—Displays the total number of Calories you
have burned. Note: If the pedaling resistance is near
the.lowest or highest setting, the actual number of
Calories you have burned will be slightly lower or ;
higher than the number displayed.
SCAN—Displays the SPEED, TIME, DISTANCE and
CALORIE modes, for five seconds each, in a repeating
cycle.
EXERCISE MONITOR OPERATION
When the power is turned on, the SCAN mode will b e . .
selected automatically: One mode indicator will appear
by the word "SCAN.“ The SPEED, TIME, DISTANCE
and CALORIE modes will be displayed in a repeating
cycle. A second mode indicator will show which mode
is currently displayed.
If desired, the SPEED, TIME, DISTANCE or CALORIE
mode can be selected for continuous display by
repeatedly pressing the display mode button. The
modes will be selected in the following order SPEED,
TIME, DISTANCE, CALORIE, SCAN.
To reset the LCD display, turn the power off and then
on again by pressing the power button twice.
TURNING THE POWER OFF
r
When you are finished exercising, press the power
button to turn the power off. Note: If the pedals are not
moved and the controls are not used for four minutes,
the power will turn off automatically.
10