Carpet preparation, Filling cleaner with water and cleaning solution, Power cord and switch – Sears 175.867029 User Manual
Page 5: Operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CARPET PREPARATION
OPERATION
For best results prepare caipet for cleaning as follows:
1. Vacuum carpet to remove loose dirt before using Clever.
2. To remove stains and grourKi in dirt present in heavy traffic
areas of the carpet, spray or rub Sears Heavy Traffic Pre
Treatment (82833) into caipet before using Cleaner. Follow
directions on the bottle.
FILLING CLEANER WITH WATER AND
CLEANING SOLUTION
Sae Figure 4
1. C^en nd of the Rller Opening.
2. Add Sears All In One Carpet Cleaner (82813) solutbn or
Sears Upholstery Cleaner (82843) solution to Solution Tank
(d^jertding on type of cleaning to be performed). Follow
directions on label of bottle.
3. Pour olean, hot water (from tap) into Rller Opening in the
Solution Tank — use two (2) gallons of water.
4. Close Filler Opening.
NOTE: This unit may become damaged if boiling water is used.
FILLER
OPENING
SOLUTION
TANK
Rg.4
POWER CORD AND SWITCH
See Figure
5
1. Plug Power Cord into electrical outlet.
2. Turn Power Switch to ’QN” position.
— Continued—