Sears KENMORE 385.128418 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTIONS. CARE FOR YOUR MAGHINE
Replace the Light Bulb
Cleaning the Machine
1.
Unplug the machine and open the
face cower.
CAUTION! The light bulb will be
HOT,
Protect your
fingers
when
you
handle it.
2.
Push the bulb up and turn the
bulb counter-clockwise to remows
It.
3.
Put the new bulb in by pushing it
up and turning it clockwise.
To insure that your machine operates at its best, you need to keep the essential parts clean at all times.
The feed dogs and shuttle race areas can attract dust and lint. Your machine can become sluggish or knock loudly if a thread
!S
caught.
Check and dean those areas about every three months under normal use.
if you sew frequently, dean more often.
* Clean the Feed Dogs
1,
Using a screw driver, remove 2. Use a lint brush and clean the feed 3. Replace needle plate into position.
needle plate.
dogs.
43