beautypg.com

Operating humidifier controls – Sears QUIET COMFORT 758.14417 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Operating Humidifier Controls

The operating controls of your Kenmore
Quiet Comfort whole house humidifier are
located on the top center of the humidifier.
The controls are found under the smoked
control cover, located between the air circu­
lating fans.
Lift the control cover by placing your finger
in the round cutout and lifting. The cover will
stay open. Now you can clearly see the con­
trol area. Familiarize yourself with the con­
trols and reference the diagram of the con­
trol area for the correct naming used in this
manual.

To Operate the Controls

Humidity Controi; ^

Adjust the amount of humidity depending on

your needs. The humidifier will turn on and
off as required to maintain level of humidity
selected. A medium setting is recommend­
ed, but there are times when low or high
amount of humidity may be preferred. For
constant operation of humidifier, rotate
humidity knob all the way clockwise. This
allows for the maximum amount of humidity
to be evaporated into the air continuously.

IMPORTANT: Water damage may result if
condensation starts to form on windows or

walls. Humidity Control setting should be

lowered until condensation no longer forms.

Speed Control 0

The unit is adjusted from off “ | ” to high
“ • • • ” with a rotary speed control. The
higher the air flow speed, the more water is
evaporated and released into the air. Low
speed “ * ” is the quietest and is provided for
conditions that may not require as high an
evaporation rate.

VIS-FILL Water Bottle Gauges and

Fill Lights

This humidifier is equipped with indepen­
dent (left and right) water level bottle
gauges. When the unit is energized the cen­
ter area of the control panel containing the
gauges and fill indicators will illuminate red
to depict the operation mode. The right bot­
tle as viewed from the front of the humidifier

will always empty first. As it empties the

number of red bars will decrease. When it is

totally empty the Fill Indicator immediately

beside the bars will Illuminate. NOTE: The
humidifier will not shut off at this stage.

Once the right bottle empties, the humidifier

will begin to use the water from the left bottle

until it is depleted. At this time the Fill

Indicator beside it will illuminate. There will

still be a slight delay in the unit shutting off

while it depletes the water in the bottom of
the cabinet. At this time or anytime during

normal operation you may fill the water bot­

tles to continue operation. Note: A small
amount of water remains in cabinet after both

Fill Indicators turn on and the unit shuts off.

Left Bottle

Fill Indicator

Manual Dryout

At the end of the humidification season or if

you do not plan to run the humidifier for one

week or more, you can override the auto­

matic shutoff function to completely dry the
humidifier cabinet out.

To do this, simply slide the float retainer locat­
ed at the back of the humidifier cabinet to the
top position of the slot it is located in. This will

hold the float in an upward position and the

fans will run until you turn the power off.

NOTE: Be sure to position float retainer to

the normal operating mode (lowest position

in slot) for humidifier operation.

Below is a diagram of the slot the float retain­

er is located in at the back of the cabinet.

Back of Cabinet

TOP POSITION

IS FOR MANUAL
DRYOUT

^ BOTTOM POSITION

IS FOR NORMAL

OPERATION MODE

FLOAT
RETAINER
SLOT