beautypg.com

Location instructions (continued), Electrical hook-up, Water fill – Sears QUIET COMFORT 758.14417 User Manual

Page 5: Water fill -6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Location Instructions (continued)

NOTE: Due to release of cool, moist air

from humidifier, it is best to direct air away
from home thermostat and hot air registers.

It is best to position humidifier next to an

inside wall. Hot air registers and cold air

from outside walls can affect the efficiencies

of the controls. Unit should not be placed

where warm air from a hot air register blows

directly on unit.

Moist air (humidity) produced will disperse
into the whole house, but area closest to the
unit will have the highest humidity. If the unit
is positioned close to a window, condensa­

tion may form on the window pane. If this is

not appropriate the unit should be reposi­

tioned in another location.

Electrical Hook-Up

Locate nearest 120V A.C. wall socket in
the location desired, preferably on inside

wall. Plug in the electrical cord.

Step 2
The humidifier should be positioned with the

back (cord exit side), at least 2 inches away

from the wall. Air needs to enter through the

louvres in the rear panel in order for the
humidifier to operate at peak efficiency.

At Least 2" From Wall

7777777777^ carpet

I

- Front of Cabinet

Front Caster

- Caster Pad

NOTE: If positioning on
carpet, place caster pads
under front casters only

"to level (If necessary).

If it still does not fit, contact a qualified

electrician to install the proper outlet. Do

not change the plug in any way.

WARNING: To reduce the risk of fire

or shock hazard, humidifier should

be plugged into a 120V A.C. outlet. Do
not use extension cords

To reduce the risk of electrical shock, this
humidifier has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse plug.

Water Fill

WARNING: To reduce the risk of shock,
always unplug humidifier before clean­

ing or servicing.

WARNING: To reduce the risk of fire or
shock hazard, do not pour or spill water

into control or motor area. Close the

control cover. If controls get wet, let
them dry completely and have unit
checked by an authorized service per­
sonnel before plugging in.

This humidifier is designed for use with the
two water bottles that are located under the

pivoting lid.
Open the pivoting lid of the humidifier.

Remove the water bottles by lifting them

straight up and out of the cabinet.