beautypg.com

Operation änd adjustment, I©perat!on and adjustment, Danger – Sears Lifestyler 831.298&50 User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

OPERATION ÄND ADJUSTMENT

GROUNDING INSTRUCTIONS

"This product must be grounded. If it should malfunction or break down, grounding provides a path

of least resistance tor electrio current to reduce the risk of electric shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that Is properly Installed and grounded in accordance with all local

vWwtiiüJ liJlvJ WI W i 11 C*i I

»

DANGER:

Improper connection of the equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or serviceman if you are In doubt as to whether the
product is properly grounded. Do not modify the plug provided with the producHf it will not fit the
outlet, have a proper outlet Installed by a qualified electridan.

This product is for use on a nominal 120-vo!t circuit, and has a grounding plug that looks like the plug

illustrated in Drawing 1. A temporary adapter that looks like the adapter illustrated in Drawing 2 may
be used to connect this plug to a 2-pole receptacle as shown in Drawing 2 if a properly grounded outlet
is not available. The temporary adapter should be used only until a properly grounded outlet (Drawing

1) can be installed by a qualified electrician. The green coiored rigid ear, lug, or the like extending from

the adapter must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place by a metal screw. Some 2-poIe receptacle
outlet box covers are not grounded. Contact a qualified electrician to determine if the outlet

box cover Is grounded before using an adapter.

SILICONE APPLICATION

To reduce the friction of the walking belt and prevent exces­
sive wear on the treadmill, a non-dti,'hon-petroleum-base
silicone lubricant should be applied to the walking platform.

Lubricant should be applied before Initial use of the

treadmill. UNPLUG THE POWER CORD, lift each side of
the walking belt and spray lubricant generously onto the

area indicated. Lubricant should also be applied after every

10 hours of use or whenever treadmill performance

decreases. (Uni*Sport silicone spray is recommended.
Lubricant is sold at most hardware and automotive stores.)