Sears Lifestyler 831.298&50 - Manual (Page 4)

ASSEMBLY
Set the treadmill in a cleared area and remove the packing materials. Make sure that all parts are
included before disposing of the packing materials. Please read each step carefully before
beginning.
1 .
2 .
Raise the Upright Post (13) to a vertical position. Insert
the Lock Knob (25), with the Lock Knob Washer (24), into
the Upright Post, and turn the Knob clockwise until
almost tight Leave a little play in the Upright Post for
the following steps,
Slide the upper end of the Side Rail (79) into the opening
in the ieft side of the Console (1). insert the Short Side
Rail Bolt (76) through the metal plate under the Console,
and tighten the Bolt into the Side Rail. Note: If the Side
Rail cannot be inserted into the Console far enough to
attach the Bolt, roll back the Side Rail Foam Grip (78)
slightly.
3. Align the hole in the lower end of the Side Rail (79) with
the hole in the Frame (40). Insert the Long Side Rail
Bolt (11) through the Side Rail and Frame. Reach under
the Frame and thread the Side Rail Nut (14) onto the
end of the Bolt. Tighten the Lock Knob (seé step 1).
Make sure that all parts afe lightened securely before using
the treadmill.