To set the time of bay clock, To reset the time, Eho-of»cycle tone – Sears KENMORE 911.363209 User Manual
Page 6: To set the timer, T© cancel the timer, El@cic hmb timek
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
eL@CIC hMB TIMEK
The CLOCK and TliMER are operated by four touchpads.
The CLOCK and TIMER do not control the oven.
TO SET THE TIME OF BAY CLOCK
1. Press CLOCK,
”12:00" stops flashing and "SET TIME" flashes.
2. Use the UP or DOWN touch pad to set the correct
time of day.
3. The clockwmstartkeep!ngtlmeandthewords"SET
TIME" will disappear within the next 50 seconds.
TO RESET THE TIME
To reset the TIME use the UP or DOWN touch pad. "SET
TIME" will flash and you can change thelime. The TIME
will count down from the new time you select and "SET
TIME" will disappear In about 4 seconds.
EHO-OF»CYCLE TONE
The END-OF-CYCLE tone Will Sound when the TIMER
countdown is complete. The display will show ".00” and
you will hear a series of beeps. Press TIMER ON/OFF or
CLOCK to stop the tone.
TO SET THE TIMER
The TIMER displays hours and minutes. The maximum
setting Is 9 hoursand4S minutes on the TIMER. Seconds
will be displayed during the countdown of the last
minute only. The TIMER will beep when one minute
remains in the countdown. Seconds will be displayed
during the last minute countdown.
1.
PressTlMERON/OFF. "00"appearsand“SET TIMER"
flashes.
2. Select the desired time using the UP or DOWN touch
pad. The TIMER will begin to count down and "SET
TIMER" will disappear about 4 seconds after you
select the time. If you do not wish to wait 4 seconds
press TIMER and the countdown will begin
immediately.
T© CANCEL THE TIMER
If you wish to cancel theTIMER while It Is counting down
press TIMER ON/OFF. The word "TIME" will disappear
from the display and the display win return to the time of
day.
If you wish to cancel the TIMER while "SET TIMER" Is
flashing in the display, press TIMER ON/OFF twice.
NGCTL19