Remotable 0¥1n d©or, Replacinq the oven lights – Sears KENMORE 911.363209 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REMOTABLE 0¥1N D©OR

To removes

1. Open the door to the stop position (see Illustration), STOP (BBOIt)

position

2. Grasp the door at each side and lift up and off the

hinges.

NOTES When the door is removed and hincie arms
are at stop position» do not hirmp or try to move

the hinge arms. The hinges could snap hack
causing an injury to the hands or damage to the

porcelain on the front of the range. Cover the

hinges with toweling or empty towel roils while
working In the oven area.

To replaces

1. Hold the door over the hinges with the slots at the

bottom edge of the door lined up with the hinges.

The hinge arms must still be In the stop
position.

2. Slide the door down onto the hinges as far as ft will

go and close the door.

REPLACINQ THE OVEN LIGHTS

Do not touch hot oven bulb. Do not touch buDb
with wet hands. Never wipe oven light area with
wet cloth.

Never touch the electrically live meta! collar on the bulb

when replacing it

Electrical power must be shut off if you have to
replace a broken bulb.

Replace the bulb with a 40 watt appliance bulb. An

appliance bulb is smaller than a standard 40 watt houses
hold bulb and is made to withstand high oven tempera
tures and have a much longer bulb life.

BULB

SOCKET

NGMNT18