Light bulb changing, To check brushes, To replace agitator assembly – Sears 116.26212 User Manual

Page 17: Warning, Agitator servicing

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

LIGHT BULB CHANGING

1. Remove Power-Mate® cover as shown in
BELT CHANGING AND AGITATOR

CLEANING section.

2. Push in and turn

bulb counterclock

wise, then puli out
to remove.

3. Push in and turn
bulb clockwise, to
replace. Bulb must
not be higher than

15Watts(130Volts).

4. Reinstall Power-Mate® cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section.

NOTE: See PARTS AND FEATURES for
Bulb number.

AGITATOR SERVICING

^WARNING

Electrical Shock Or Personal Injury

Hazard

Disconnect electricai supply before per

forming maintenance to the vacuum

cieaner. Failure to do so could result in
eiectricai shock or personai injury from

vacuum cleaner suddenly starting.

TO CHECK BRUSHES

Sase Support Bars

When brushes
are worn to the
level of the base
support bars,
replace the
agitator
assembly.

TO REPLACE AGITATOR
ASSEMBLY

1. Remove Power-Mate® cover, agitator

cover, belt and agitator assembly. See “To
Remove Belt” in BELT CHANGING AND

AGITATOR CLEANING.

2. Replace agitator assembly.

3. Reinstall belt, agitator cover and Power
Mate® cover. See “To replace belt" in BELT
CHANGING AND AGITATOR CLEANING.