Suggested pile height settings, Attachments, Attachments on handle – Sears 116.26212 User Manual

Page 10: Attachments on wands, Caution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SUGGESTED PILE HEIGHT SETTINGS

For best deep down cleaning, use the XLO

setting. However, you may need to raise the

height to make some jobs easier, such as

scatter rugs and some deep pile carpets,

and to prevent the vacuum deaner from

shutting off. Suggested settings are:

HI - Shag, deep pile, or scatter rugs.

MED

- Medium to deep pile.

LO ~ Low to medium pile.

XLO - Most carpets and bare floors.

ATTACHMENTS

CAUTION

DO NOT attach or remove handle or

wands while vacuum cleaner is ON.
This could cause sparking and damage
the electrical contacts.

ATTACHMENTS ON HANDLE

NOTE:

If the

Power-Mate® is

attached, turn
vacuum cleaner
off before remov

ing handle from

wands.

1. Press handle

quick release

button and pull
up on handle.

2. Slide attachments firm
ly on handle as needed.
See

ATTACHMENT USE

TABLE.

ATTACHMENTS ON WANDS

1. To remove

wands from Power

Mate®, lock wands
in straight-up posi

tion.

2. Remove Power-Mate® plug
and cord from holders.

3. Disconnect cord
and steady Power

Mate® with foot and

turn wands until lock

button disappears,

then pull wands out
of Power-Mate®.

4. Put attachment on

wands as needed. See

ATTACHMENT USE

TABLE.