Power-mate® care, Belt changing and agitator cleaning, To remove belt – Sears 116.26212 User Manual

Page 15: Belt changing and agitator cleaning to remove belt

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

POWER-MATE® CARE

Always follow all safety precautions when

cleaning and servicing the Power-Mate®.

warning

Electrical Shock Or Personal injury
Hazard

Disconnect electrical supply before
performing maintenance to the vacuum
cleaner. Failure to do so could result in

electrical shock or personal injury from
vacuum cleaner suddenly starting.

BELT CHANGING AND AGITATOR CLEANING

TO REMOVE BELT

1. Turn Power

Mate® upside
down.

2. Unscrew the two

(2) Power-Mate®

cover screws.

3. Turn Power
Mate® right side up.
Press handle
release pedal and
lower the swivel.
Lift rear latches up.

4. To remove cover,
grasp the sides and pull
out.

5. Depress tabs
on rear of
agitator cover
and rotate

forward to

release from the
Power-Mate®
base.

Agitator

Cover

6. Lift agitator
assembly out
and remove

worn belt.

End Cap

7. Check and clean end cap areas. See

AGITATOR ASSEMBLY

for picture of

complete agitator assembly.