Sears 71381 - Manual (Page 12)

REPLACING THE OVEN LIGHT (some models)
Do not touch hot oven bulb. Do not touch bulb
with wet hands. Never wipe oven light area with
wet cloth.
Neve r touch the electrically live metal collar on the tMJib
when replacing It.
Electrical power must be shut off if you have to
replace a broken bulb.
Replace the bulb with a 40 watt a(H>Hance bulb. An
appliance bu lb Is smaller than a standard 40 watt house­
hold bulb and Is made to withstand high oven tempera­
tures and have a much longer bulb life.
BULB SOCKET
REMOVAL OF PACKAGING TAPE:
The safest way to remove adhesive left from packing tape on new appliances to assure no damage is done to the finish
of the product Is an application of household liquid dish washing detergent, mineral oil, or cooking oil. Apply with
soft cloth and allow to soak. Wipe with soft cloth. DO NOT use plastic pad or equivalent. This procedure Is also safe
for the face of microwave doors and other plastic parts.
NOTE: The plastic tape that is not removed from chrome trim on range parts CANNOT be removed if baked on.
REMOVABLE OVEN DOOR
To remove;
1. Open the door to the stop position (see Illustration).
2. Grasp the door at each side and lift up and off the
hinges. Do not lift the door by the handle. Glass
breakage or damage to the door could result.
NOTE: When the door is removed and hinge arms
are at stop position, do not bump or try to move
the
hinge arms. The hinges could snap back
causing an injury to the hands or damage to the
porcelain on the front of the range. Cover the
hinges with toweling or empty towel rolls while
working in the oven area.
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges.
The
hinge arms must still be in the stop
position.
2. Slide the door down onto the hinges as far as It will
go and close the door.
STOP POSITION
11 NGMNT27-1