Sears 580.761652 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
iF YOU HAVE ANY PROBLEMS operating your pres
sure washer, please call the pressure washer helpline
at 1-800-222-3136.
HOW TO USE YOUR PRESSURE WASHER
WARNING NEVER adjust spray pattern
when spraying. NEVER put hands In front
of spray nozzle to adjust spray pattern.
You couid be injury.
HOW TO USE THE ADJUSTABLE NOZZLE
On the end of your spray gun is a nozzle that you
can slide forward and backward and that you can
aiso twist from side to side. With the adjustable noz
zle you can adjust the spray pattern to be either high
pressure or low pressure. You can also adjust the
spray so it is concentrated in a stream pattern or
expanded into a fan pattern.
• Slide the nozzle forward when you wish to adjust
the spray to low pressure mode. Slide the nozzle
backward to achieve high pressure.
Pressure Mode
for low pressure
mode and detergent
application
Twisting the nozzle adjusts the spray pattern from
a narrow pattern to a fan pattern.
Twist nozzle counter
clockwise for fan
spray pattern
Twist nozzle clock
wise for narrow
spray pattern
For most effective cleaning, keep spray nozzle
between 8 to 24 inches away from cleaning sur
face.
® if you get spray nozzle too close, especially using
high pressure mode, you may damage the clean
ing surface.
HOW TO USE THE TURBO NOZZLE
The rotating turbo nozzle increases the area of the
high pressure stream.
IMPORTANT: You cannot apply detergent with this
nozzle.
To attach the turbo nozzle:
* Remove the adjustable nozzle from the gun.
® Attach the turbo nozzle.
Turbo Nozzle Adjustable Nozzle
APPLYING DETERGENT AND CLEANING WITH
ADJUSTABLE NOZZLE
IMPORTANT: Use soaps designed specifically for
pressure washers. Household detergents couid dam
age the pump.
IMPORTANT; You must attach all hoses before you
start the engine. Starting the engine without ait the
hoses connected and without the water turned ON
will damage the pump.
To apply detergent follow these steps:
“ Prepare the detergent solution as required by the
job.
• Hang the detergent solution on the “J" hook on
the wire form on the guide handle.
» Place small filter on the clear, chemical injection
Slide the adjustable nozzle forward to low pres
sure mode. Detergent cannot be applied with noz
zle In high pressure position.