First, charge the battery prior to use, To load the battery – Casio EX-ZR200 EN User Manual
Page 16
16
Quick Start Basics
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-130)
for power. Never try to use any other type of battery.
1.
Open the battery cover.
Slide the battery cover slider towards OPEN
and then open it as indicated by the arrows in
the illustration.
2.
Load the battery.
With the EXILIM logo on the
battery facing downwards (in the
direction of the lens), hold the
stopper next to the battery in the
direction indicated by the arrow
as you slide the battery into the
camera. Press the battery in until
the stopper secures it in place.
3.
Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
• For information about how to replace the
First, charge the battery prior to use.
To load the battery
EXILIM logo
Stopper
Front
Back
Battery contacts