Mssinerecittdeni, 6wie«t 0 – Philips AZ1010-17 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MSSinERECittDEni
1
Set the POWER controt to TAPE.
2
Press STOP-OPEN □
a
to open the cassette compartment.
3
Insert a recorded cassette with the open side upwards and close
the cassette compartment.
4
Press PLAY <3 to start playback.
5
Press M» or to rewind or fast forward the tape.
6
To stop the tape press STOP-OPEN □ A.
Note: The keys are released at the end of the tape.
6wie«t
0«
Recording is permissible insofar as copyright or other rights of
third parties are not infringed upon.
For recording on this set you should use a cassette of the type
NORMAL (lEC type I). This deck is not suitable for recording on
cassettes of the type CHROME ((EC type II) or METAL (I EC
type IV).
The recording level is set automatically. The controls VOLUME and
DBB do not affect the recording.
At the very beginning and end of the tape, no recording will take
place in the 7 seconds during which the leader tape passes the
recorder heads.
Protecting tapes from accidentai erasure
Keep the cassette side to be protected in front of you and snap off
the left tab. Now, recording on this side is no longer possible.
To record again on this side of the cassette, cover the opening with
a piece of adhesive tape.
17
cKsmmmmm
1
Set the POWER control to CD.
2
Insert a CD and, if desired, program the track numbers.
3
Press STOP-OPEN □ ^ to open the cassette compartment.
4
Insert a blank, unprotected cassette and close the cassette
compartment.
5
Press RECORD O to start recording.
Playing of the CO or program starts automatically.
6
For brief interruptions, press PAUSE
II.
Press the PAUSE
10
key
again to resume recording.
7
To stop recording, press STOP-OPEN n
Note: the recording can be started from different positions:
- if the CD player is in pause mode, recording will start
from this very position {use
km
or
mh
I
~
if the CD player is in stop mode, recording will start from
the beginning of the CD or program.
RacdnKiitfcfwff fa 1 Tune to the desired radio station (see "RADIO"). 2 Press STOP-OPEN □ ^ to open the cassette compartment. 3 Insert a blank, unprotected cassette and close the cassette compartment. 4 Press RECORD O to start recording. 5 For brief interruptions press PAUSE II. To resume recording press the PAUSE DO key again. 6 To stop recording, press STOP OPEN □ 13