Philips AZ1010-17 - Manual (Page 5)

CBPlMrSt
SearcliliiMfcvtf^
Self cting another track
Briefly press the km or w» button once/several times to skip to the
beginning of the current previous or subsequent track(s).
During CD play:
CD play continues automatically with the selected track.
When CD playback is stopped;
Press >ifl to start CD play.
— Display indication: the selected track number.
Searching for a passage during CD play
1 Hold down the km or ihh button to find a particular passage in a
forward or backward direction.
CD play continues at a low volume.
2 Release the button \when you have reached the desired passage.
Note: In the different CD modes or when playing a program, searching
is only possible within the particular track.
CP iiWIi SliiitoM
1 During CD play press CD MODE repeatedly to cause the display
to show the different playing modes.
shufre ; All tracks of the CD (or program} are played in
random order.
- SHUFRE REPEAT ALU All tracks of the CD (or program] are
played repeatedly in random order
REPEAT: The current track is played repeatedly.
RB»EAT Au; The entire CD (or program) is played repeatedly.
2 After 2 seconds of flashing display indication, CD play starts in
the chosen mode.
3 To return to normal CD play, press CD MODE until the display
indication disappears.
in
t^ptnarER
You can select a number of tracks and store these in the memory
in the desired sequence. You can store any track more than once.
A maximum of 20 tracks can be stored in the memory.
1 When CD play is stopped, select the desired track with km or
WH.
2 As soon as the number of the desired track is displayed, press
CD MODE to store the track in the memory.
PROGRAM appears on the display. P lights up briefly, then the
number of the stored track is shown.
3 Select and store all desired tracks in this way.
4 You can review your settings by pressing and holding CD MODE
for more than 1 second.
— The display shows all stored track numbers in sequence.
If you try to store more than 20 tracks, the display shows A.
PteyiBgttw|p>yai«
Press CHB to play the program.
When playback is stopped, press □.
-- no lights up briefly, PROGRAM disappears and your program ^
is erased.
Note: The program will aiso be erased if you:
- interrupt the power supply.
- open the CD compartment, or
- move the POWER control.
11