Philips AZ1060 - Manual (Page 20)

CD PLAYER CASSETTE RECORDER
m
Erasing a program
You can erase the program by:
- pressing STOP ■ once in the STOP position;
- pressing STOP ■ twice during playback;
- pressing the CD door open;
- switching to another source: TAPE/TUNER.
• The display shows' no P'"°3 ' briefly.
CD player and CD handling
• The lens of the CD player should never be touched!
• If the CD player cannot read CDs correctly, use a commonly
available cleaning CD to clean the lens before taking the set to
repair. Other cleaning methods may destroy the lens.
• Sudden changes in the surrounding temperature can cause
condensation to cloud over on the lens of your CD player.
Playing a CD is then not possible. Do not attempt to clean the
lens but leave the set in a warm environment until the
moisture evaporates.
• Always keep the CD compartment closed to avoid dust on the
lens.
• To take a CD out of its box, press the center spindle while
lifting the CD. Always pick up the CD by the edge and return
the CD to its box after use to avoid scratching and dust.
• To clean the CD, wipe in a straight line from the center
towards the edge using a soft, lint-free cloth. Do not use
cleaning agents as they may damage the disc.
• Never mite on a CD or attach any stickers to it.
CASSEHE PLAYBACK
/. Select TAPE source.
-* The display shows fcRPf throughout tape operation, and the
function indication lights up.
2. Press STOP'OPEN 14 to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press PLAY ◄ to start playback.
5. To pause playback, press PAUSE II. To resume, press the key
again.
6. By pressing SEARCH or ►► fast winding of the tape is
possible in both directions.
7. To stop the tape, press STOP»OPEN *4.
- The keys are automatically released at the end of the tape and
the tRPE indication and function light go out, except if
PAUSE II has been activated.
GI
Si
1.1
2.1
3.FI
.1
5.f
- F
To
• F
• \
- F
6.F
7.T
14