Philips AZ1060 - Manual (Page 18)

CD PLAYER
s
(0
Playing a CD
1. Select CD source.
/_ □' is displayed briefly and the function indication lights up.
2. Press OP^*CLOSE to open the CD door.
Display: ¡_ q ' op^n when you open the CD door.
3. Insert a CD or CD-R(W) with the printed side facing up and
close the CD door.
-* Display: d iSC flashes as the CD player scans the contents of
a CD. The total number of tracks and playing time are then
shown.
4. Press PLAY»PAUSE ►II to start playback.
Display: Current track number and elapsed playing time of the
track during CD playback.
5. To interrupt playback press PLAY»PAUSE HI.
Press PLAY»PAUSE ►!! again to resume play.
The display freezes and the elapsed playing time flashes when
playback is paused.
6. To stop CD playback, press STOP ■
7. To switch off, adjust the POWER slider to TAPE/ off position
with the keys on the tape deck released.
The function indicator goes out.
JVote: CD play will also stop when:
- the CD door is opened;
- the CD has reached the end
(unless you have selected HEPEAT or REPEAT ALL);
- you select another source: TAPE / TUNER.
Selecting a different track
• Press SEARCH or once or repeatedly until the desired
track number appears in the display.
• If you have selected a track number shortly after loading a CD or
in the PAUSE position, you will need to press
PLAY»PAUSE H i to start playback.
Finding a passage within a track
1. Press and hold down on SEARCH i** or ►►!.
-»The CD is played at high speed and low volume.
2. When you recognize the passage you want,
release SEARCH r« or
- Normal playback continues.
Note:
During a CD program or If SHUFFLE/ REPEAT active, searching is
only possible within a track.
Di
Yoi
pla
SF
SF
RE
RE
1.
2.1
3.'
Pn
Pro
the
Up
u
7.1
3.F
4.F
Rei
Inti
the
12